DIY Appliance Repair Tips

Wait! Before you pick up the phone to call an appliance repair in Chicago for assistance, you might be able to keep your appliances in good condition with a lot of the troubleshooting tips in this post.

1. Smelly Washing Machine

The presence of a foul odor in a washing machine can defeat the entire point of the appliance! If you are attempting to get your clothes so that they are fresh and clean, but your washer isn’t cooperating, run an cycle without clothes/laundry in hot water with two cups of white vinegar and a half-cup of baking soda to remove the unpleasant odor. This problem commonly occurs in front-loading washing machines. To ensure no more future odors, crack the door open after washes so it can dry out.

2. Inefficient Refrigerant

A semi-cool refrigerator is not a good sign. A warm refrigerator definitely will not keep drinks cold, and the food inside of it could also be on the verge of rotting! In a lot of cases, your refrigerator won’t need professional repair; the inside might just need a cleaning. Or the coils on the back of the refrigerator need cleaning.

Unplug it and pull it far from the kitchen wall before wiping down the refrigerator coils. If you do not see immediate cooling improvement, it’s best to contact a professional appliance repair service in Chicago.

3. Clicking Igniter on Stove

If the igniter on your gas-powered stove clicks and clicks and the burner will not light, inspect to be certain your burner lid is tightened and correctly aligned. You may possibly notice this problem if you have had a recent boil over or spill on your stove top.

Otherwise, the source is probably a clogged igniter. To clean , first remove the burner lid and clear off any particles. You can also use a clothes pin to scrape debris from the grooves of the igniter. If that does not fix the problem, it is best not to take a lighter apart for anyone without training; in this case hire a professional appliance repairman to determine the problem.

4. Broken Garbage Disposal

Your garbage disposal has self-protection in the form of an overload trip. If it becomes filled up, overheats, grinds for too long, or has a different issue, the garbage disposal might simply have to be reset rather than repaired. You should be sure the switch is turned OFF. Next, locate the switch on the disposal unit under the sink and press the button. If the button doesn’t stay pushed in, wait ten minutes and try again. Turn on the water from the faucet and then turn the button on.

If the garbage disposal is clogged with food and you only hear a humming sound instead of the grinding of waste, you might need to turn the blades with a hex key to clear the jam. Now, press the reset switch to get the disposal working again. If these tips do not get it working like normal, do not give in to the temptation to push one of your hands down into the system to figure things out. Be safe and schedule an appointment with a professional appliance service in Chicago.

5. No Power from Outlet

In a kitchen or bathroom, the outlets need to be installed with GFCI capabilities to protect people against harm in wet areas. If a GFCI outlet isn’t generating power, press the red reset button to see if that will restore power.

If it doesn’t, or if you’re trying on a typical outlet, make sure that a breaker hasn’t tripped in your breaker box. If you’re not sure if a circuit breaker is tripped, flip it so it is in the OFF position and then flip it back onto the ON position. Just remember, safety around wiring is critical. Should you have any doubts, call a professional service.

6. Wobbling Washing Machine

A wobbling washer will often create quite a loud banging and is not a good way to get clean laundry. If your washing machine starts knocking around, the machine may be in trouble. To fix this problem, rotate the legs of the washing machine to lift or lower all corners until it is straightened out. One other likely situation is that the appliance is not leveled. Open the top and arrange the clothes so they’re evenly dispersed in the drum of the washing machine.

Trying this will help the washing machine to not have to work as hard. If you do attempt to move around the clothing a few times to no avail, do not ignore the issue. You may have a loosened drum or motor mount to fix, which should be easy enough for a professional to repair. But if you continue to operate the washer when it has this issue could ruin other components and result in a more costly repair in the future.

Call for Help

If none of these suggestions can fix your issues, you will want to schedule an appointment from Premiere Chicago Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts

CLICK-TO-CALL